Converting a 2 way Draw Traverse Curtain Rods to 1 way draw Rod
Converting a traverse rod to a one way draw traverse rod is not a difficult task if you follow the  step by step
instructions.  The instructions can be used for tradition traverse curtain rods or decorative traverse curtain
rods
A. . Lay  curtain rod face down. Then pull the sections  
of the curtain rod apart.  Free the cord from the right
master ; then slide it off and discard.


One way Stack right

B. Change screw in remaining master and slide off.  
Move all rings/slides to outside (large) section of the
traverse rod .  Replace master and rejoin rod.







One Way Stack Left

C.  Untie the cord on the left and remove cord guide.  
Restring the cord ad re-knot.  Then untie the cord on
the right and pull down between wheels on right.  Add
the guide then re-string and re-knot.   Change the
screw in the master , reverse arm then slide off.  Move
all ring/slides to inside (small section of the traverse
rod.  Replace the master and rejoin rod.